Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER Instrukcja Użytkownika Strona 17

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 100
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 16
Section 3: Installing the Instrument
05/11 18 51209 Revision 2
3.1 Network Port
The network port is built in as standard equipment. The LEDs on the connector indicate whether the
port is functioning.
Remote operation of the instrument from the PC is
possible; install VNC program version 3.3.7 on the PC.
For setting the network address, see Chapter 5.2.2.
Transfer rate: 10 Mbit/sec, 100Mbit/sec,
full/half duplex, auto-detection
Connection
method:
Point to point
Cable: CAT 5 patch cable, shielded twisted pair
Cable impedance: 150 ohms
Connection: RJ45 socket on top of housing
Przeglądanie stron 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 99 100

Komentarze do niniejszej Instrukcji

Brak uwag